The TMO-1 Module provides
low cost dedicated conditioning for one bridge type load or pressure sensor. Several units can be powered from a common power supply. The TM0-1 requires a 12 VDC input
Souce. The units provide balance and span adjustment via precision 10 turn pots.
Full scale output is specified at plus or minus 8 VDC. The TMO-1 provides a floating shunt calibration
circuit which applies calibration at the transducer, thereby eliminating
errors due to line losses. The factory set band-width is 220 Hz. The
TM0-1 can be ordered with a 2200 Hz bandwidth for dynamic applications and a 2.2 Hz or 22 Hz to improve stability
in applications where noise is an issue.
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
SPECIFICATIONS
AMPLIFIER SECTION
Type:
Bipolar, differential
Gain Range:
75 to 1000
Input Sensitivity:
1 mV/V minimum for 8 VDC output
Output Voltage:
0 to ±8 VDC (linear to 9.5)
Output Current:
0 to 10 mA
Nonlinearity:
.01% maximum
Accuracy:
±.05% of FS
Stability:
±.1% for 24 hours
Tempco:
.01% full scale/°C
Noise and Ripple:
Less than 5 mV P-P at gain=1000
Filter Type:
2 Pole Butterworth
Frequency Response:
DC to 220 Hz (2.2, 22, 2200 Hz available, no charge)
The TMO-1 Module provides
low cost dedicated conditioning for one bridge type load or pressure sensor. Several units can be powered from a common power supply. The TM0-1 requires a 12 VDC input
Souce. The units provide balance and span adjustment via precision 10 turn pots.
Full scale output is specified at plus or minus 8 VDC. The TMO-1 provides a floating shunt calibration
circuit which applies calibration at the transducer, thereby eliminating
errors due to line losses. The factory set band-width is 220 Hz. The
TM0-1 can be ordered with a 2200 Hz bandwidth for dynamic applications and a 2.2 Hz or 22 Hz to improve stability
in applications where noise is an issue.
SPECIFICATIONS
AMPLIFIER SECTION
Type:
Bipolar, differential
Gain Range:
75 to 1000
Input Sensitivity:
1 mV/V minimum for 8 VDC output
Output Voltage:
0 to ±8 VDC (linear to 9.5)
Output Current:
0 to 10 mA
Nonlinearity:
.01% maximum
Accuracy:
±.05% of FS
Stability:
±.1% for 24 hours
Tempco:
.01% full scale/°C
Noise and Ripple:
Less than 5 mV P-P at gain=1000
Filter Type:
2 Pole Butterworth
Frequency Response:
DC to 220 Hz (2.2, 22, 2200 Hz available, no charge)
About Us
Smart Sensors
