ACCURATE / HIGH RELIABILITY IN HARSH MARINE & INDUSTRIAL ENVIRONMENTS CLEVIS LOAD PIN LOAD CELL

CLP SERIES

CAPACITY RANGES:
750, 1,500, 3,000, 6,000,
12,500, 18,000, 30,000 LBS.

CAPACITY RANGES:
50,000, 75,000, 100,000,
125,000, 160,000,200,000 LBS.

Our CLP Series clevis load pins are used most
often where pins or large bolts would normally
be carrying the load. Typical applications would
include replacement for shackle pins, clevis
pins, and pulley shafts. These load pins are
and incorporate a stainless steel molded
connector system for use in harsh industrial
environments. The mating connector, sold
seperately, is available in three different cable
lengths.

Typical Applications
Crane Load Monitor	Sprocket Axle
Front End Loaders	Crane Cargo Hook
Tow Bar Connection	Connecting Rod
Railroad Couplings	Forklifts
Conveyer Belt Rollers	Mooring Line Tension
Clevis Joints	Tow Line Tension

The Load Cells below come Calibrated in Compression, Tension Calibration is optional

SPECIFICATIONS

	Rated Output (R.O.):		2 mV/V nominal
	Nonlinearity:		0.50% of R.O.
	Hysteresis:		0.50% of R.O
	Nonrepeatability:		0.15% of R.O.
	Zero Balance:		1.0% of R.O.
	Compensated Temp. Range:		60° to 160°F
	Safe Temp. Range:		-65° to 200°F

	Safe Temp. Range:		-65° to 200°F
	Temp. Effect on Output:		0.0085% of Load/°F
	Temp. Effect on Zero:		0.003% of R.O./°F
	Terminal Resistance:		350 ohms nominal
	Excitation Voltage:		10 VDC
	Safe Overload:		150% of R.O.

Anti-Rotation & Retaining Device
In pins with a diameter less than 2 inches, the Keeper Plate used at dimension H & J (provides and maintains proper angular alignment of Load Pin in regard to load direction) will retain in one direction only, requiring a Retaining Ring.

DIMENSIONS (INCHES)

MODEL	CAPACITY LBS.	A DIA.	B	C	D	E	F	H	J	KEY DIA.	L	SNAP RING GROOVE DIA.	N	O DIA.
CLP-750	750	0.375	.41	0.56	.41	1.38	3.69	.20	.25	N/A	.31	0.352	.029	2.00
CLP-1.5K	1,500	0.375	.41	0.56	.41	1.38	3.69	.20	.25	N/A	.31	0.352	.029	2.00
CLP-3K	3,000	0.500	.50	0.75	.50	1.75	4.00	.20	.25	N/A	.25	0.468	.039	2.00
CLP-6K	6,000	0.750	.59	1.00	.59	2.18	4.50	.20	.25	.156	.31	0.704	.046	2.00
CLP-12.5K	12,500	1.000	.63	1.00	.63	2.26	4.75	.20	.25	.219	.50	0.940	.046	2.00
CLP-18K	18,000	1.250	.81	1.38	.81	3.00	5.63	.27	.25	.219	.63	1.176	.056	2.00
CLP-30K	30,000	1.500	.94	1.63	.94	3.51	6.13	.27	.25	.281	.63	1.406	.056	2.00
		+.000
		-.002

Anti-Rotation & Retaining Device
In pins with a diameter of 2 inches and over, the Keeper Plate used at dimension H & J (provides and maintains proper angular alignment of Load Pin in regard to load direction) alone will perform as a complete Retainer.

DIMENSIONS (INCHES)

MODEL	CAPACITY LBS.	A DIA.	B	C	D	E	F	H	J	KEY DIA.
CLP-50K	50,000	2.000	1.00	2.00	1.00	4.00	6.63	.266	.38	.281
CLP-75K	75,000	2.500	1.25	2.50	1.25	5.00	7.63	.266	.50	.281
CLP-100K	100,000	2.750	1.47	2.69	1.47	5.63	8.38	.406	.50	.406
CLP-125K	125,000	3.000	1.44	3.00	1.44	5.88	8.75	.406	.63	.406
CLP-160K	160,000	3.500	1.75	3.50	1.75	7.00	10.00	.531	.63	.531
CLP-200K	200,000	4.000	2.25	4.00	2.25	8.50	11.75	.531	.75	.531
		+.000
		-.002

The Load Cells below come Calibrated in Compression, Tension Calibration is optional

Wiring Color Code (WCC3)

4 Conductor

Internal Temperature Compensation and Balance Network Not Shown

CAL-TEDS Plug & Play Option

AD9 (9 PIN "D" Series) Connector attached to the end of a Load Cell or Torque sensor cable with a TEDS (Transducer Electoric Data Sheet) EPPROM. Used with a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will self calibrate. This option is a real time saver.
» Learn more about Plug & Play Smart Sensors

SSI LOAD CELL DISPLAY

SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING
IEEE 1451.4 COMPLIANT

$675

» More info

DPM-3 LOAD CELL DISPLAY

SMART PLUG & PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT

$395

» More info

SSI LOAD CELL DISPLAY

SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING
IEEE 1451.4 COMPLIANT

$675

» More info

DPM-3 LOAD CELL DISPLAY

SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT

$395

» More info

DPM-2 LOAD CELL DISPLAY

PANEL MOUNT METER
AMPLIFIER / CONDITIONER

$425 to $840

» More info

TIO-3000 LOAD CELL DISPLAY

VERSATILE 5-CHANNEL INDUSTRIAL
AMPLIFIER /CONDITIONER

From $1000 chassis only

» More info

TMO-1 LOAD CELL SIGNAL CONDITIONER

LOW COST 12 VDC POWERED
AMPLIFIER / CONDITIONER MODULE
0 to ±8VDC OUTPUT

$245

» More info

TMO-1-24 LOAD CELL SIGNAL CONDITIONER

LOW COST 24 VDC POWERED
AMPLIFIER / CONDITIONER MODULE
0 to ±8VDC OUTPUT

$245

» More info

TMO-2 LOAD CELL SIGNAL CONDITIONER

STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
0 to ±10VDC OUTPUT

$375

» More info

TMO-2A LOAD CELL SIGNAL CONDITIONER

STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
4-20mA OUTPUT

$425

» More info

PSMR LOAD CELL POWER
SUPPLY

4 TO 15 VDC POWER SUPPLY
MODULE

$160

» More info

PSM-F10 LOAD CELL POWER
SUPPLY

10 VDC FIXED POWER SUPPLY
MODULE

$158

» More info

Order Code Model

Capacity Range

Description

Price

Quantity

Add to Cart

CLP-750

750 lbs