|
GENERAL PURPOSE REACTION TYPE SHAFT TORQUE SENSOR |
| |
STS SERIES |
 |
 |
CAPACITY RANGES:
600, 1,200, 2,000, 3,000,
6,000, 12,000 IN. LBS. |
| |
The STS Series is our general purpose
reaction type shaft torque sensor. They
are often installed between devices such
as motors, switches, shafts or axles, and
their mounting plate to provide bi-directional
torque output.
They are available in six
capacity ranges from 600 inch lbs. through
12,000 inch lbs., and are made from 17-4ph
heat treated stainless steel. The sensing
element incorporates bonded foil strain
gages of the highest quality and are sealed
for protection against most industrial
environments. |
|
|
|
|
|
SPECIFICATIONS |
|
|
|
|
|
|
Rated Output (R.O.): |
|
2 mV/V nominal |
|
|
Nonlinearity: |
|
0.2% of R.O. |
|
|
Hysteresis: |
|
0.10% of R.O |
|
|
Nonrepeatability: |
|
0.5% of R.O. |
|
|
Zero Balance: |
|
1.0% of R.O. |
|
|
Compensated Temp. Range: |
|
60° to 160°F |
|
|
Safe Temp. Range: |
|
-65° to 200°F |
|
|
Temp. Effect on Output: |
|
0.005% of Load/°F |
|
|
Temp. Effect on Zero: |
|
0.01% of R.O./°F |
|
|
Terminal Resistance: |
|
350 ohms nominal |
|
|
Excitation Voltage: |
|
10 VDC |
|
|
Safe Overload: |
|
150% of R.O. |
|
|
|
|
|
|
|
|
|
| STS-600 |
600 |
2.25 |
1.00 |
2.75 |
2.25 |
1.55 |
8.00 |
1/4 |
| STS-1.2K |
1,200 |
2.25 |
1.00 |
2.75 |
2.25 |
1.55 |
8.00 |
1/4 |
| STS-2K |
2,000 |
2.25 |
1.00 |
2.75 |
2.25 |
1.55 |
8.00 |
1/4 |
| STS-3K |
3,000 |
3.00 |
1.50 |
3.75 |
3.50 |
1.95 |
11.0 |
3/8 |
| STS-6K |
6,000 |
3.00 |
1.50 |
3.75 |
3.50 |
1.95 |
11.0 |
3/8 |
| STS-12K |
12,000 |
3.00 |
1.50 |
3.75 |
3.50 |
1.95 |
11.0 |
3/8 |
|
|
| Wiring Color Code (WCC1) |
4 Conductor |
|
|
|
| |
| Internal Temperature Compensation and Balance Network Not Shown |
|
 |
|
CAL-TEDS Plug & Play Option |
|
|
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver.
» Learn more about Plug & Play Smart Sensors
|
|
|
|
|
|
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING
IEEE 1451.4 COMPLIANT
$675
» More info |
|
 |
|
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
|
|
|
|
|
|
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING
IEEE 1451.4 COMPLIANT
$675
»
More info
|
|
 |
|
DPM-3 LOAD CELL DISPLAY
SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
|
|
|
 |
|
DPM-2 LOAD CELL DISPLAY
PANEL MOUNT METER
AMPLIFIER / CONDITIONER
$425 to $840
» More info |
|
 |
|
TIO-3000 LOAD CELL DISPLAY
VERSATILE 5-CHANNEL INDUSTRIAL
AMPLIFIER /CONDITIONER
From $1000 chassis only
» More info |
|
|
 |
TMO-1 LOAD CELL SIGNAL CONDITIONER
LOW COST 12 VDC POWERED
AMPLIFIER / CONDITIONER MODULE
0 to ±8VDC OUTPUT
$245
» More info |
|
|
|
TMO-1-24 LOAD CELL SIGNAL CONDITIONER
LOW COST 24 VDC POWERED
AMPLIFIER / CONDITIONER MODULE
0 to ±8VDC OUTPUT
$245
» More info |
|
|
 |
|
TMO-2 LOAD CELL SIGNAL CONDITIONER
STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
0 to ±10VDC OUTPUT
$375
» More info |
|
|
|
TMO-2A LOAD CELL SIGNAL CONDITIONER
STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
4-20mA OUTPUT
$425
» More info |
|
|
 |
|
PSMR LOAD CELL POWER
SUPPLY
4 TO 15 VDC POWER SUPPLY
MODULE
$160
» More info |
|
 |
|
PSM-F10 LOAD CELL POWER
SUPPLY
10 VDC FIXED POWER SUPPLY
MODULE
$158
» More info |
|
|