What is TEDS?

TEDS, or Transducer Electronic Data Sheet, is a set of electronic data in a standardized format defined within the IEEE 1451.4 standard. This data specifies what type of sensor is present, describes its interface, and gives technical information such as sensitivity, bridge type, excitation, etc.

Are TEDS sensors the same as "Plug & Play" sensors?

Yes. "Plug & Play" sensors refer to the emerging IEEE 1451.4 specification of sensors that contain calibration or configuration information in memory on the sensor. This information is normally stored in an EEPROM chip attached to a sensor. By having this chip, the sensor can identify and describe itself to the network and or Smart Load Cell Meter, thereby easing automatic system configuration. With TEDS you will save time. You can interchange any TEDS sensor without having to program or calibrate the instrument. It's truly Plug & Play.
 

Learn about Plug & Play Smart Load Cell Systems.

What are the advantages of TEDS?


Benefits that can be experienced now include:

  • Simplified troubleshooting
  • Reduced safety risks. It is no longer necessary to
    "climb on machines" for connection verification
  • Reduced costs for set-up and tear-down
  • No recalibration is needed when replacing Load Cell
  • The data acquisition system can recalibrate itself

Advantages that will be available in the future include:

  • Integration with wireless transceivers
  • Elimination of large lengths of analog wiring
  • Reduced installation, maintenance and upgrade
    costs of measurement and control systems
  • The opportunity to add intelligence to Load Cells


Can a legacy / non-TEDS Load Cell be converted to a TEDS "Plug & Play" Load Cell?


Yes. A legacy / non-TEDS Load Cell can be converted to a TEDS "Plug & Play" Load Cell. Transducer Techniques offers a CAL-TEDS service to convert your Load Cell to a TEDS "Plug & Play" compliant sensor. The service consists of a connector, recalibration and a programmed EEPROM. This will update a legacy / non-TEDS Load Cell to be capable of plugging into Transducer Techniques IEEE 1451.4 compliant instruments.


What is Virtual TEDS?


Virtual TEDS is an online library of data sheets developed by National Instruments (www.ni.com) that contain the same information that would be found in an EEPROM TEDS, but exist for Load Cells not containing the EEPROM. This would define Plug & Play capability for legacy / non-TEDS Load Cells. As a National Instruments Plug & Play Sensor Partner and a National Instruments Alliance Member, Transducer Techniques has contributed the data for all its Load cell to the Virtual TEDS database.

 

What parameters are included on a Transducer Techniques TEDS chip?

TEDS Item Values
Manufacturer ID Transducer Techniques (ID#42)
Model Number 28
Version Letter A
Version Number 3
Serial Number 149087
Transducer Electrical Signal Type Bridge Sensor
Minimum Physical Value 0 lb
Maximum Physical Value 100 lb
Minimum Electrical Value 0 V/V
Maximum Electrical Value .0024709 V/V
Mapping Method Linear
Bridge Type Full
Impedance of Each Bridge Element 350 Ohm
Response Time .000001 sec
Excitation Level (Nominal) 10 V
Excitation Level (Minimum) 1 V
Excitation Level (Maximum) 12 V
Calibration Date 1/1/2004
Calibration Initials RAB
Calibration Period (Days) 365 days
Measurement Location ID 0
Users Data Thank You From TTI