Print Load Cell Products
Item #: DPM-3 $ 570.00

Plug & Play Smart Digital Panel Mount Load Cell Meter

The DPM-3 Digital Panel Meter VAC is a smart Plug & Play TEDS IEEE 1451.4 compliant Digital Panel Mount Load Cell meter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the DPM-3 will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the DPM-3 can be set up by simple front panel push buttons. If a serial communication board is installed, setup can be performed utilizing the free downloadable software and a computer. The DPM-3 can be scaled to a full 5 digit display from -99,999 to +99,999 counts to read directly in engineering units such as grams, ounces, pounds, etc. The DPM-3 samples 60 readings per second (50 for 50 Hz operation) for fast control response and true peak/valley reading capability. The meter has an adaptive digital filter that can automatically select the best time constant for minimum noise, yet respond rapidly to an actual change in signal level. The peak and valley values can be displayed by a push of a button on the front panel. Auto-tare allows the meter to be set to zero for any input signal level. Isolated 5, 10, or 24 VDC output provides load cell excitation. Excitation supply can provide up to 120 mA of current at 10V to power four 350-ohm load cells in parallel. Available options include two or four 8A Form C relays or 120 mA solid state relays, analog output, serial communications, and low voltage power supply. All Plug-In boards are field installable.

View Specs