SST-HV Plug & Play Smart TEDS IEEE 1451.4 Compliant Transmitter

To operate this great time and cost saving, self-calibrating transmitter, connect it to a TEDS compatible Load Cell or Torque Sensor and the SST-LV will automatically self-calibrate, saving valuable engineering time and cost consistent with calibration requirements.

The SST-HV is a Plug & Play Smart TEDS IEEE 1451.4 compliant Transmitter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the SST-HV will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the SST-LV Transmitter is easily programmed using a PC with an RS232 port and Instrument Setup (IS) software.

The SST-HV may be powered from 95-240 Vac ±10%. The SST-HV has an Isolated transducer excitation output that is selectable between 5Vdc or 10Vdc. There are Dual solid-state relays and an Isolated 4-20 mA, 0-20 mA or 0-10V analog output. There are three Isolated serial data transmitter output (RS232, Half-duplex RS485, full-duplex RS485) and three serial protocols available, selectable with our downloadable (IS) software (Modbus RTU, Modbus ASCII and Custom
ASCII). Isolation to 250V rms is provided for power, signal input, analog output, relay outputs, and communications. Isolation adds safety and avoids possible ground loops. The transducer excitation output is isolated to 50V from signal ground. Interfacing the SST-HV Transmitter to a TEDS IEEE 1451.4 Interfacing the SST-HV Load Cell Transmitter to a TEDS IEEE 1451.4 compliant Load Cell / Torque Sensor is as easy as plugging a mouse into a computer, making it a true
plug-and-play experience.

Phone (800) 344-3965
FAX (951) 719-3900
Transducer Techniques, LLC
42480 Rio Nedo Temecula, CA 92590

CAL-TEDS Plug and Play
SST-HV Plug & Play Smart TEDS IEEE 1451.4 Compliant Transmitterr